The receiver is a flat top M4 Mil-Spec upper receiver are forged CNC Machined from 7075-T6 Aluminum, the hardest and most durable material of any upper! This 16” 7.62 X 39 barrel is made from 4150 Chrome Moly steel, has 1:10 twist rate & carbine gas system. This incredible rail has 200% increase in keymods, so your attachment position options are endless! The rail is a 15” CBC Gen ll Keymod rail made from Airplane Aluminum and then hard coat anodized to improve the strength!
Barrel: 16″ 7.62 Melonite Barrel Chrome Moly
Twist Rate: 1:10
Feed Ramps: M4
Gas Block: Steel .750 Low Profile
Gas Tube: DGI Stainless carbine-Length
Muzzle Device: Steel A2 Style Flash Hider
Rail: 15″ CBC Gen ll Free Float Keymod
Upper Receiver: Forged Upper Receiver
Upper Components: Mil-Spec Forward Assist, Mil-Spec Dust Cover, and Brass Deflector
CBC Industries Buttstock Kit includes:
- Large rubber butt-pad that is removable
- 6 Position Buttstock
- Locking clip to ensure placement
- Mil-Spec Receiver Extension
- Mil-Spec Spring
- End Plate
- Locking Castle Nut
Complete AR-15 Lower Parts Kit ready for installation in your lower receiver. Standard AR-15 components include:
Hammer, Hammer Pin, Hammer Spring, Trigger, Trigger Pin, Trigger Spring, Trigger Guard ,Trigger Guard Pin, Disconnector, Disconnector Pin, Safety Selector, Safety Selector Detent, Safety Selector Spring, Pistol Grip, Pistol Grip Screw, Pistol Grip Lock Washer, Bolt Catch, Bolt Catch Spring, Bolt Catch Buffer, Bolt Catch Roll Pin, Take Down Pin, Pivot Pin, Take down & Pivot Detent (x2), Take down & Pivot Spring (x2), Magazine Catch, Magazine Catch Button, Magazine Catch Spring, Buffer Retaining Pin, Buffer Retaining Pin Spring
Failure to observe safe firearm handling practices may result in serious bodily injury or death. CBC Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. Additionally, it is highly recommended that the firearm (as with all new firearms) is thoroughly inspected, cleaned and oiled prior to use.
Product Details: AR-15 Blemished Rifle Kit – 16″ / 7.62 x 39 / 1:10 / 15″ Keymod AR-15 Handguard / Charging Handle / AR-15 Buttstock Kit / AR-15 Lower Parts Kit (DOES NOT INCLUDE BCG) B305060
➲ CBC Keymod Handguard
New for 2020, these AR-15 handguards are built to provide rugged, reliable performance. Designed with the advanced shooter in mind, these handguards are both sleek and ergonomic in the hand and that translates into faster on-target performance and ease of use. These AR handguards provide Keymod slots for mounting attachments and feature robust steel mounting hardware to ensure an easy rock-solid installation.
The barrel is one of the few components that directly affect the accuracy and weight of your build. Designed for corrosion resistance, this barrel will not let you down. This barrel is machined from 4150 Chrome Moly Steel, heat treated to RC 28-32 hardness, and properly stress relieved. This barrel has a nitride finish for increased strength and durability. It is chambered 7.62×39 chamber, with a 1:10 twist rate. This is the perfect barrel for an AR15 build, keeping weight to an absolute minimum, while still offering a significant ballistic advantage.
➲ A2 Flash Hider
The muzzle device is designed to perform a specific task, like suppress flash intensity or reduce felt recoil. This A2 Flash Hider is machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It provides effective flash suppression that preserves the shooter’s night vision by disrupting the muzzle flash when firing in low light conditions. While its closed bottom with top and side ports offers reduced dust signature when shooting from the prone position while additionally acting as a compensator.
➲ Adaptive Tactical EX Adjustable Stock
Advanced design and a high-impact polymer construction make the Adaptive Tactical EX Performance Adjustable AR-15 Buttstock the ideal upgrade for your AR15. The EX Performance M4-style Stock features an easy-to-reach rapid adjust lever for custom length-of-pull, and includes an integrated QD swivel attachment and molded in non-rust standard sling swivel attachment. Durable polymer construction with non-slip vented rubber recoil pad, oversized extra strength adjustment pin, and sleek industrial design.
➲ Buffer Tube Assembly
This buffer tube assembly kit includes an impact extruded 7075-T6 aluminum receiver extension with a durable hardcoat anodized finish. Featuring an extended bottom lip reducing carrier tilt, the buffer tube is compatible with MIL-SPEC AR-15 stocks.
➲ AR-15 Lower Parts
The lower parts are integral to a reliable AR firearm. Our AR-15 lower parts provide rock-solid performance in demanding conditions.
➲ Standard MIL-SPEC Charging Handle
A central component of your AR-15, the charging handle not only assists in chambering a round, but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. With lightweight aluminum construction and a traditional snag-free latch design, this charging handle provides superior function and reliability.
➲ Upper Receiver
The foundation of all good ARs is built upon a dependable upper receiver. CBC upper receivers offer best-in-class quality while providing you years of dependable service. Boasting a MIL-SPEC type III hard coat anodized finish and machined from 7075-T6 forged aluminum, this M4 flat-top receiver delivers a lifetime of superior function. You want your AR built upon a solid platform - this receiver gives you the confidence that your AR-15 will function when it counts most.
➲ Carbine Gas Tube
An essential component to your AR15 is the gas tube, which keeps your build up and running. This carbine-length gas tube is constructed from corrosion resistant stainless steel ensuring a lifetime of service.
➲ .750 Low Profile Gas Block
The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth phosphate finish, this .750 low-profile gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.
CBC Blemished AR Parts & Assemblies - Blemished AR parts are 100% functional guaranteed AR assemblies & parts that may have acquired minor dents or dings, scratches, milling marks, or uneven stenciling during the production process - many times very minor and unnoticeable. For this reason, these AR parts and assemblies do not meet our high standards for finish quality and we offer them to you at a reduced price. Save even more with CBC blemished reduced price AR parts!