Description
THIS KIT IS EVERYTHING YOU NEED TO BUILD AN AR PISTOL EXCEPT A STRIPPED LOWER. *Non-Lock Back! The receiver is a flat top M4 Mil-Spec upper receiver are forged CNC Machined from 7075-T6 Aluminum, the hardest and most durable material of any upper. This 7″ 9mm barrel is made from 4150 Chrome Moly steel, has 1:10 twist rate & blow back gas system. The rail is a 7″ CBC M-LOK Rail. BOLT CARRIER GROUP AND CHARGING HANDLE INCLUDED Barrel: 7″ 9mm Melonite Barrel Chrome Moly Tw
![9MM AR-9 Pistol Kit - 7 INCH BARREL / 1:10 TWIST / 7 INCH M-LOK Flat Top Handguard / Non-Lock Back / BCG / CHH / LPK / A-205-444 1 205 444](https://b2940821.smushcdn.com/2940821/wp-content/uploads/2021/02/205-444.jpg?lossy=1&strip=1&webp=1)
THIS KIT IS EVERYTHING YOU NEED TO BUILD AN AR PISTOL EXCEPT A STRIPPED LOWER.
*Non-Lock Back! The receiver is a flat top M4 Mil-Spec upper receiver are forged CNC Machined from 7075-T6 Aluminum, the hardest and most durable material of any upper. This 7″ 9mm barrel is made from 4150 Chrome Moly steel, has 1:10 twist rate & blow back gas system. The rail is a 7″ CBC M-LOK Rail.
BOLT CARRIER GROUP AND CHARGING HANDLE INCLUDED
Barrel: 7″ 9mm Melonite Barrel Chrome Moly
Twist Rate: 1:10
Feed Ramps: M4
BCG: Case Hardened 8620 Steel Nitride Coated
Muzzle Device: A2
Rail: 7″ CBC M-LOK Rail
Upper Receiver: Forged Upper Receiver
Upper Components: Mil-Spec Forward Assist, Mil-Spec Dust Cover, and Brass Deflector
* Lower receiver options include using standard AR-15 lower with a mag conversion kit or optionally you can mate this product with a dedicated 9mm Glock style lower receiver.
CBC Industries Pistol Buffer Tube Kit includes:
- Pistol receiver extension
- Standard 3.5 oz carbine buffer
- Carbine spring
- Castle nut
- End plate
- Comfortable foam cheek pad
Complete AR-15 Lower Parts Kit ready for installation in your lower receiver. Standard AR-15 components include:
Hammer, Hammer Pin, Hammer Spring, Trigger, Trigger Pin, Trigger Spring, Trigger Guard ,Trigger Guard Pin, Disconnector, Disconnector Pin, Safety Selector, Safety Selector Detent, Safety Selector Spring, Pistol Grip, Pistol Grip Screw, Pistol Grip Lock Washer, Bolt Catch, Bolt Catch Spring, Bolt Catch Buffer, Bolt Catch Roll Pin, Take Down Pin, Pivot Pin, Take down & Pivot Detent (x2), Take down & Pivot Spring (x2), Magazine Catch, Magazine Catch Button, Magazine Catch Spring, Buffer Retaining Pin, Buffer Retaining Pin Spring
SAFETY WARNING:
Failure to observe safe firearm handling practices may result in serious bodily injury or death. CBC Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product. Additionally, it is highly recommended that the firearm (as with all new firearms) is thoroughly inspected, cleaned and oiled prior to use.
Please Note: An AR-15 Pistol upper assembly has a barrel less than 16 in length. Pistol uppers are only for use on AR-15 pistol lowers and legal Short-Barreled Rifles. Other configurations may violate Federal law. Installation of AR-15 upper assemblies with certain features including, but not limited to: flash hiders, bayonet lugs, and threaded muzzles may violate state and/or local laws.
Product Details: 9MM AR-9 Pistol Kit – 7 INCH BARREL / 1:10 TWIST / 7 INCH M-LOK Flat Top Handguard / Non-Lock Back / BCG / CHH / LPK / A-205-444
➲ M-LOK Handguard
New for 2022, these AR-15 handguards are built to provide rugged, reliable performance. Designed with the advanced shooter in mind, these handguards are light and ergonomic, features that provide faster on-target performance and reduced fatigue. Includes robust steel mounting hardware to ensure an easy installation and a rock solid platform.
➲ Afterburner Compensator
The CBC Afterburner compensator is a muzzle device that designed to reduce flash intensity while suppressing recoil. These linear compensators are machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It utilizes a linear design to direct the high-pressure gas behind the bullet in a straight line away from the shooter which results in a reduction of perceived noise. Due to its six-hole design surrounding the central bore, it provides effective flash suppression that preserves the shooter?s vision in low light conditions.
➲ Pistol Buffer Tube Assembly
This AR-15 Pistol Buffer Tube Assembly comes with everything you need to get your next ar pistol build ready. Assembly includes buffer tube, castle nut, endplate, spring & carbine buffer. The tube is extruded from 6061-T6 aluminum and has a matte black hardcoat anodized finish. This assembly features a snug fit to ensure no unwanted brace movement during pistol operation. In addition, it allows for any desired brace position with zero restrictions giving you the most comfortable fit and versatility.?
➲ AR-15 Lower Parts
The lower parts are integral to a reliable AR firearm. Our AR-15 lower parts provide rock-solid performance in demanding conditions.
➲ Bolt Carrier Group
There is nothing more crucial to the performance of your AR-9 than the bolt carrier group. Manufactured to MIL-SPEC and finished with a superior quality nitride finish that protects against corrosion and heat, this 9mm (GLOCK STYLE) BCG will not let you down. To ensure that it will provide superior performance in your AR-9, each bolt carrier group undergoes high-pressure testing (HPT) and magnetic particle inspection (MPI). Designed for both standard and lock-back operating systems, this 9mm bolt provides heavy-duty performance and reliable cycling.
➲ Barrel
The barrel is one of the few components that directly affect the accuracy and weight of your build. Designed for corrosion resistance, this barrel will not let you down. This barrel is machined from 4150 Chrome Moly Steel, heat treated to RC 28-32 hardness, and properly stress relieved. This barrel has a nitride finish for increased strength and durability. It is chambered 9mm chamber, with a 1:10 twist rate. This is the perfect barrel for an AR9 build, keeping weight to an absolute minimum, while still offering a significant ballistic advantage.
➲ Standard MIL-SPEC Charging Handle
A central component of your AR-15, the charging handle not only assists in chambering a round, but is your main tool to clear a round that won?t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-15. With lightweight aluminum construction and a traditional snag-free latch design, this charging handle provides superior function and reliability.
CBC Blemished AR Parts & Assemblies - Blemished AR parts are 100% functional guaranteed AR assemblies & parts that may have acquired minor dents or dings, scratches, milling marks, or uneven stenciling during the production process - many times very minor and unnoticeable. For this reason, these AR parts and assemblies do not meet our high standards for finish quality and we offer them to you at a reduced price. Save even more with CBC blemished reduced price AR parts!
Reviews
There are no reviews yet.